3 M LC/LC 50/125 Multimode Bend Insensitive Duplex Fiber Patch Cable - LSZH - OM5

LC/LC 50/125 Multimode Bend Insensitive Duplex Fiber Patch Cable - LSZH - OM5 - 3M

These OM5, wideband, multimode, bend insensitive fiber (BIF) cables are optimized for multi-wavelength transmission systems operating in the range of 850-950nm.\u00a0Short Wavelength Division Multiplexing (SWDM), which reduces the parallel fiber count by at least a factor of four, allows for the continued use of just two fibers (rather than 8) for transmitting 40 and 100 Gb/s with reduced fiber counts and higher speeds. BIF cables offer greater flexibility in more demanding environments. It is typically used in data centers or any areas where tight bends and high flexibility are required. The\u00a0unique refractive trench with a low refractive index glass layer in BIF, which reduces light dispersion upon twisting and bending, ensuring network transmission is stable and fast. This cable has a minimum bend radius of 7.5mm and a low smoke zero halogen rated jacket.

Features:\u00a0

• OM5 50/125\u03bcm
• LC to LC
• Duplex Fiber Count
• LSZH Jacket
• Polarity -\u00a0A(Tx) to B(Rx)
• Bend Insensitive Fiber (BIF)
• Minimum Bend Radius - 7.5mm
• Cable Diameter - 2.0mm
• Ethernet Distances
• 40G - 400m at 850nm
• 100G - 150m at 850nm
• Insertion Loss -\u00a0\u22640.2dB
• Return Loss -\u00a0\u226435dB\u00a0
• Wavelength -\u00a0850/1300nm
• Attenuation at 850nm -\u00a03.0 dB/km
• Attenuation at 1300nm -\u00a01.0 dB/km
• Backward Compatible with OM4 Networks